** Click back arrow to RETURN
CUSHION OPTIONS
SEAT CUSHION
MAJESTIC – Seat cushions use high resiliency high 1.8 density polyurethane foam core providing durability, support and comfort. This foam core is wrapped in a generous soft layer of Dacron polyester fibers. For additional cushion crown and a soft, plush look, it is inserted into a down-proof cover that is channeled (to prevent drift) and filled with a special blown polyester fiber blend. This cushion component is inserted into a zippered leather case. This provides a comfortable, long lasting and sharp looking seat that keeps its shape for years to come.
MAJESTIC DB – An optional cushion that includes down feathers will provide more plush seating. The construction is the same as above, except the channeled down-proof cover is filled with a blend of 90% waterfowl duck feathers and 10% polyester fiber. The feather option offers a more plush and softer seat but like all feather seat cushions, they tend to flatten out over time and need to be fluffed up occasionally.
MAJESTIC II – Another option is a similarly constructed cushion, but includes small individually pocketed Marshall coil springs in the center of the foam core. This seat cushion will have a higher crown, and will spring back when not in use therefore, holds it shape better. It also provides more support and provides a solid “ride” (good for high use, seniors who like to sit higher or get up easier, and heavier people).
MAJESTIC II DB – This is a combination of the above “Majestic DB and the Majestic II”.
SEATING SYSTEM
Underneath the seat cushion is the seating support system. It starts with heat-tempered steel coil springs underneath the cushions, secured to the seat bottom wood frame and each other using the time-honored, true 8-way hand-tying allowing for a comfortable seat plus durability. This traditional high-end construction method stabilizes the coil springs and causes the entire spring set to work in unison for maximum comfort.
BACK CUSHION
Like the seat cushions, all backs are constructed according to the unique style of the piece of furniture. Some backs will require hand tied coiled springs, some use Marshall Coil spring units, these are referred to as “tight backs” as they are built into the backrest. Other styles will have bustle, semi- attached, or loose cushion backs. All are hand constructed by craftsmen to ensure a level of comfort that will meet or exceed the demands of our customers. Each is hand cut, filled, weighed and sewn with generous amounts of Dacron polyester fiber into channeled bags (to prevent drift), which are then inserted into zippered leather casings. All of this attention to detail results in the most comfortable and durable seat possible!
CUSHION FOAM and CHEMICALS
Recent regulatory changes in California and media attention has prompted a number of customers to inquire about the chemicals used in furniture. The primary interest revolves around flame retardant chemicals in the polyurethane foam used in furniture. Classic Leather has removed all flame retardant chemicals from their polyurethane foam as of August 2012. Chemicals that were of particular concern were TDCPP, TDCEP, TDCP, and Penta Bromine’s. These chemicals haven’t been used by Classic Leather for a number of years.
Leather Furniture USA
leatherfurniture-usa.com