** Click back arrow to RETURN
Standard MAJESTIC II
The most popular cushion became the standard as it is less firm than the optional Majestic. It is maintenance free, no fluffing required. This seat cushion uses high resiliency, high 1.8 density polyurethane foam core providing durability, support and comfort. Includes small individually pocketed Marshall coil springs inserted into the center of the foam core, which provides comfort and support. This seat cushion will have a nice high crown, and will spring back when not in use therefore, holds it shape better. The foam is then wrapped in a generous layer of Dacron polyester fibers for added softness. For an additional plush look, it is inserted into a down-proof cover that is channeled (to prevent drift) and filled with a special blown polyester fiber blend. This cushion component is then inserted into a zippered leather case. This provides a comfortable, long lasting and sharp looking seat that keeps its shape for years to come.
Optionally, is a similarly constructed cushion, but does not include the small individually pocketed Marshall coil springs in the center of the foam core. This seat cushion will have a lower crown and will not spring back when not in use.
Underneath the seat cushion is the seating support system. It starts with heat-tempered steel coil springs underneath the cushions, secured to the seat bottom wood frame and each other using the time-honored, true 8-way hand-tying allowing for a comfortable seat plus durability. This traditional high-end construction method stabilizes the coil springs and causes the entire spring set to work in unison for maximum comfort.
Like the seat cushions, all backs are constructed according to the unique style of the piece of furniture. Some backs will require hand tied coiled springs, some use Marshall Coil spring units, these are referred to as “tight backs” as they are built into the backrest. Other styles will have bustle, semi- attached, or loose cushion backs. All are hand constructed by craftsmen to ensure a level of comfort that will meet or exceed the demands of our customers. Each is hand cut, filled, weighed and sewn with generous amounts of Dacron polyester fiber (for softness) into channeled bags (to prevent drift), which are then inserted into zippered leather casings. All of this attention to detail results in the most comfortable and durable seat possible!
CUSHION FOAM and CHEMICALS
Recent regulatory changes in California and media attention has prompted a number of customers to inquire about the chemicals used in furniture. The primary interest revolves around flame retardant chemicals in the polyurethane foam used in furniture. Classic Leather has removed all flame retardant chemicals from their polyurethane foam as of August 2012. Chemicals that were of particular concern were TDCPP, TDCEP, TDCP, and Penta Bromine’s. These chemicals haven’t been used by Classic Leather for a number of years.
Leather Furniture USA